Diamond Impregnated Core Bits

The diamond impregnated core bit has emerged as the most commonly used type in the mineral exploration industry.

The advantages of using diamond impregnated core bits over bits manufactured with other cutting media include:

An extremely wide range of application.
A simple bit crown geometry that makes them less susceptible to in-hole damage than bits manufactured with other types of cutting media. As such, they are more tolerant of changing or banded geological formations.
Their multi-layered cutter arrangement results in better overall bit life than bits produced with other types of cutting media.
They are particularly well suited for drilling in hard, consolidated and non-abrasive formations.

This comprehensive range of high performance products represents the most recent innovations in diamond impregnated matrix technology from Dimatec. Formation conditions that range from soft, abrasive and fractured up to hard, non-abrasive and consolidated can be effectively drilled with diamond impregnated core bits in the XT-Series and S-Series range.

HR-Series

These products include the established D-Series and HR-Series product ranges that are commonly used on lower powered drilling equipment.

S-Series

The most recent diamond impregnated matrix innovations from Dimatec. A wide range of formation types can be effectively drilled with this comprehensive range of high performance products.

XT-Series

The most recent diamond impregnated matrix innovations from Dimatec. A wide range of formation types can be effectively drilled with this comprehensive range of high performance products.

D-Series

These products include the established D-Series and HR-Series product ranges that are commonly used on lower powered drilling equipment.

Testimonials

“325 meters with our bits very good in medium hard rock. Thank you!”

– Ontario, Canada

“The successful trial results of the bit prove this bit to be a serious alternative to our current bit of choice at our mine.”

– Australia

“I have a result from a new client in northern Ontario. Their last bits went 60 or 80 meters and with Dimatec bits 212 meter! Good production thank you.”

– North America

“We received the bits yesterday! We are quite pleased with all aspects of this order including the 4-day lead time. Thank you for the expedited service!”

“The meters drilled were above ‘the norm’ and we were well within and even under budget lets say…”

– Canada

“We had a good wear on the crown, the meters achieved are also worth commenting on being consistently all right around the 300’ mark. We’re happy and the reaming shells are also performing well.”

– North America